Machine-split dolomitic limestone with sawn or snapped tops and bottoms, snapped ends, and tumbled edges that soften the profile for an aged appearance. Point Reyes
Review available Thin Veneer and Full Stone profiles with profile-specific dimensions, thickness or bed depth, corner information, coverage, and installation details. Review performance, installation, and product-wide technical details that apply across this material. Profile dimensions and veneer specifications are listed above. Explore the available surface treatments and finish options for this material. Building Stone Profiles & Specifications
Stone Face Ledge
Face Dimensions Length: 8–24 innHeight: 2–8 in Thickness 3/4–1 1/2 in Coverage / Packaging Small boxes: 8 sq ft flats or 6 linear ft cornersnLarge crates: 120 sq ft flats or 70 linear ft corners Machine splitface with sawn or snapped top and bottom, snapped ends, and tumbled edges. Stone Face Ledge
Face Dimensions Length: random 8–30 innHeight: 2–8 in Bed Depth 3 1/2–4 1/2 in; some pieces up to 5 in Coverage / Packaging Approximately 40 sq ft per tonnFull veneer pallets: 3,000 lb or 4,000 lb, stretch-wrapped Machine splitface with sawn or snapped top and bottom, snapped ends, and tumbled edges. Product-Wide Information Technical Information
Freeze-Thaw Yes Technical Notes Additional product-wide technical information Dolomitic limestone.
Origin: Valders, Wisconsin.
Approximate product weight: 173 lb/cu ft.
ASTM C97 water absorption: 1.22%; density: 155 pcf.
ASTM C99 modulus of rupture: 3,000 psi.
ASTM C170 compressive strength: 24,130 psi.
ASTM C880 flexural strength: 1,300 psi. Surface Options Available Finishes
Finish Tumbled
Explore more building stone available from Stone Matters. Explore Product Type More Building Stone
